Macpower Alumni Manual de instrucciones descargar pdf (Pagina 51)

SVAT ELECTRONICS

now you can see

CLEARVU11

To congure the DVR to work with DDNS:

1) Press Menu and Select Login / Logout

2) Type in the username and password. (default username is “aa”. Default password is “11”

3) Select Setup

4) Select Network

5) Change the Net Type to static. Note that the DHCP IP information should be copied over to Static.

6) Navigate to DDNS and press - / + to choose the DDNS website you have created. Our instructions were for

DynDNS.org.

The following information will be acquired from the DDNS account you have set up online.

7) Enter the hostname of your DDNS account. (ex BriansDVR.dyndns.org)

8) Enter the username of the account you created

9) Enter the password of the account you created

The DVR will now automatically log on to your DDNS account and update the website with your current External IP

Address.

IF YOU CANNOT CONNECT USING YOUR EXTERNAL IP ADDRESS

If the Remote Viewing Software does NOT pop up, it could be that:

•MakesureyouareusingInternetExplorer6.0orlater.

• Portforwardingisnotsetup.

• YouarenotanadministratoronthecomputerandcannotinstalltheMicrosoftadd-onprogram.

• Apop-upblockerispreventingthecontrolsorDVRfromshowingup.

• YourrouterisblockingyourcomputerfromusingtheExternalIPAddress.Tryconnectingtothisaddressfroma

remote computer that is not on the same network.

• ADSLmodemispreventingaconnection.

• Port80isbeingblockedbyyourISP(InternetServiceProvider).TrychangingtheHTTPportto2000.Port

forwarding will need to be set up for this port also.

Check all your network connections and go through the above steps again to make sure a conguration error was

not made. You may have to congure PPPoE settings to match the settings provided to you by your Internet Service

Provider (ISP). Consult your ISP for more information on your PPPoE settings.

If using a http port other then 80 the IP address must be entered with the port number at the end. (ex.

http://74.11.213.177:2000 or http://74.11.213.177 :2000) some Internet Explorer browesers require a space before

the port number.

NETWORKING GUIDE

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 73 74

Sin comentarios

Macpower Alumni Manual de instrucciones Pagina 51